home *** CD-ROM | disk | FTP | other *** search
/ Apple Service Source 1997 December / Service Source v2.5 Companion 1.iso / Macintosh / Display-Peripheral / CD-ROM Software 5.3.2 / CD-ROM Software 5.3.2 Info
Encoding:
Text File  |  1997-04-15  |  4.6 KB  |  148 lines  |  [TEXT/ttxt]

  1. Name:         Apple CD-ROM Software
  2. Version:      5.3.2
  3. Released:     February 27, 1997
  4. Requires:     US System 7.1 or later
  5. Description:
  6. Software that lets you use an Apple CD-ROM drive with your
  7. Macintosh computer. This version includes improved support
  8. for CD Extra discs.
  9.  
  10.  
  11. From the Read Me included with this software:
  12.  
  13. About Apple CD-ROM Version 5.3.2
  14.  
  15. This file includes important information about Apple CD-ROM
  16. version 5.3.2, software that lets you use an Apple CD-ROM
  17. drive with your Macintosh computer. You need system software
  18. version 7.1 or later of the Macintosh Operating System (Mac
  19. OS) to use this software. Because this information is not
  20. included in the documentation accompanying the product, you
  21. may want to print it. To do so, choose Print from the File
  22. menu.
  23.  
  24. Installation Instructions
  25.  
  26. IMPORTANT The full instructions below assume you have an
  27. Apple CD-ROM installation disk. If, instead, you're
  28. downloading the Apple CD-ROM software from an online
  29. service, follow step 1, below. Next, copy the software onto
  30. your hard disk and double-click the Installer icon to start
  31. the Installer. Then follow steps 5 through 9. 
  32.  
  33. To install this extension, follow these steps:
  34.  
  35. 1. While holding down the Shift key, choose Restart from the
  36. Special menu and continue to hold the key down until you see
  37. a message. When a message on the screen tells you that the
  38. extensions are off, release the Shift key.
  39.                 
  40. When you restart the Macintosh after you install Apple
  41. CD-ROM version 5.3.2, the extensions will turn on again. 
  42.  
  43. 2. Make sure the Apple CD-ROM installation disk is locked. 
  44.  
  45. 3. Insert the Apple CD-ROM installation disk into a disk
  46. drive. 
  47.  
  48. If you can't see the Installer icon, double-click the disk
  49. icon to open it.
  50.  
  51. 4. To start the Installer program, double-click its icon.
  52.  
  53. 5. In the Welcome dialog box that appears, click Continue.
  54.  
  55. After a moment, the Install dialog box appears. 
  56.  
  57. IMPORTANT When you started the Installer, it checked to make
  58. sure you have what you need to use the software. If you're
  59. missing anything, you'll now see a message that tells you
  60. what you need. You won't be able to install the    software
  61. until you correct the problem. If a dialog box says you
  62. don't have the correct system software, you can purchase a
  63. new version of system software from an Apple-authorized
  64. dealer. 
  65.  
  66. 6. Make sure the disk named in the Destination Disk box is
  67. the one on which you want to install the software. If it's
  68. not, click Switch Disk until the correct disk name appears.
  69.  
  70. 7. Click the Install button.
  71.  
  72. The Installer takes a few moments to calculate what needs to
  73. be done and then begins to install files.
  74.  
  75. 8. Follow the instructions on the screen until the
  76. installation is complete. 
  77.  
  78. 9. When you see a message reporting that installation was
  79. successful, click Restart to restart your Macintosh. 
  80.         
  81.  
  82. The Apple CD-ROM software is now installed on the hard disk.
  83.  
  84. Improvements to the Software 
  85.  
  86. Version 5.3.2
  87.  
  88. For CD Extra discs, the Apple CD-ROM software mounts both
  89. the HFS and ISO partitions (if present), allowing AppleCD
  90. Player to locate and use the CD Extra data regardless of
  91. what partition it is on. 
  92.  
  93. Version 5.3.1
  94.  
  95. Previously you may have received occasional error messages
  96. when scanning (fast-forwarding) between tracks in shuffle
  97. and program modes. This problem has been corrected in
  98. version 5.3.1.
  99.  
  100. Version 5.3
  101.  
  102. The Apple CD-ROM software supports all current Apple CD-ROM
  103. drives. 
  104.  
  105. Version 5.2 
  106.  
  107. The Apple CD-ROM software now supports ATAPI CD-ROM drives,
  108. such as those used in the Macintosh PowerBook 1400.
  109.  
  110. Previously system errors could occur when a shared CD-ROM
  111. drive was accessed by a client computer.This has been
  112. corrected in version 5.2.
  113.  
  114. Previously the CD-ROM drive may have gone into sleep mode
  115. while playing an audio CD. This problem has been corrected
  116. in version 5.2.
  117.  
  118. Version 5.1.7
  119.  
  120. The Apple CD-ROM software now works with 6x-speed CD-ROM
  121. drives.
  122.  
  123. Version 5.1.6
  124.  
  125. The Apple CD-ROM software now works with Apple PC
  126. Compatibility Cards for PCI-based Macintosh computers.
  127.  
  128. Version 5.1.5 
  129.  
  130. If you have an Apple CD-600 drive and were using Apple
  131. CD-ROM version 5.1, you may have had intermittent problems
  132. playing the Peter and the Wolf CD. In version 5.1.5, this
  133. problem has been corrected.
  134.  
  135. Previously a Photo CD with more than 30 sessions would not
  136. start up properly. Now a Photo CD of up to 50 sessions (the
  137. theoretical maximum number of sessions on a Photo CD) will
  138. start properly.  
  139.  
  140.  
  141. (c) 1997 Apple Computer, Inc. All rights reserved. Apple, 
  142. the Apple logo, Mac, Macintosh, and PowerBook are trademarks
  143. of Apple Computer, Inc., registered in the U.S. and other
  144. countries. AppleCD is a trademark of Apple Computer, Inc.
  145.  
  146.  
  147. Updated January 20, 1997
  148.